Due to its affordability and high durability, concrete has been a popular building material, especially for commercial and industrial buildings. It was not until the introduction of decorative concrete that it became popular for homeowners.

With its surging popularity, the number of concrete contractors in Pittsburgh is also increasing. Searching for a concrete contractor in PA will surely give you a lot of contractors to choose from.

What Is a Decorative Concrete?

Decorative concrete means transforming your usual gray and boring concrete floor or wall into something aesthetic.

It can be in the form of dying, staining, polishing, engraving, or overlaying. Let us talk about the top five options when it comes to decorative concrete to help you choose the best design for your home.

Top 5 Types of Decorative Concrete

1. Staining

Decorative Concrete

Source: advancedbuildingmaterials.com

Staining is a process of depositing deep and vibrant colors to each concrete slab. Concrete contractors in Pittsburgh PA often use acid or water-based stains. If you want a warm color on your concrete floor, staining is a good option.

You can ask your concrete contractor Pittsburgh in PA to incorporate another pattern to your stained concrete if you want to. Just let your concrete contractors know about your desire ahead of time so they can use water-based stain and not acid stain.

Staining is also known as dyeing. Even commercial projects use concrete dyeing because of its enticing effect. Some concrete companies are using more aggressive solvents such as thinner and acetone. These are known for their deeper penetration effect.

2. Stamping

Decorative Concrete

Source: lh3.googleusercontent.com

Stamping is a process where your concrete contractors will transform your concrete and make it look like brick, cobblestone, or wood. Stamped concrete offers a lot of designs to choose from, you just have to use your imagination or ask your concrete contractor for advice.

One of the downsides of stamped concrete is the need for regular maintenance to prevent it from fading. It is best for surfaces where foot traffic is low like bedrooms.

This process involves the use of molds. The molds are incorporated into the concrete while it is still in plastic mode. Other chemicals are used to add color to the concrete such as dry shakes or acid.

You might visit a home with a concrete floor that looks like timber and that is a result of stamping.

3. Polishing

Decorative Concrete

Source: talkingcity.org

Polishing is a process of making your concrete floor shine with the use of a chemical. The chemical will make it denser, ensuring that the concrete surface is even with no gaps and holes.

This option is a minimalist design. You keep your concrete’s natural color and bareness but with shinier.

Polishing is done by using grinders (mechanical ones) and different sizes of diamond pads. Your concrete contractor might add lithium or sodium silicate to make the concrete harder. This will help the concrete stand the mechanical grinders during the polishing process.

4. Overlaying

Decorative Concrete

Source: alliedoutdoorsolutions.com

If you are into restoration, your contractors might suggest using overlaying to give your concrete floors a new look. They do it by adding a new layer of concrete to your existing one. It will be stamped with a design you want to have afterward. It is easier and cheaper to do.

5. Finishing

Decorative Concrete

Source: pinimg.com

Finishing is a process where your concrete contractor creates patterns on your concrete’s surface. Different types of tools will use to make the finishing touches. Float and trowels are the most common options, and these can produce smooth to coarse finish.

Choosing the Right Decorative Concrete

Choosing the right decorative concrete for your home depends on different factors. You have to consider your budget, your home’s interior or exterior design, and your personal preference.

You can always ask your concrete contractors in Pittsburgh to give you an estimate of your project and to give you their insight when it comes to matching your preferable concrete design to your existing home design.

Another consideration is the location. Your concrete design for your bathroom is different for your room and patio or deck. You have to think of a different design for your concrete driveway as well.

Even the amount of concrete to be used in each part of your house differs. Your concrete contractor will be the one to decide on such.

Final Thoughts

With the wide varieties of concrete designs to choose from, you can now use concrete in and out of your home. This means hiring a single construction company that can oversee the entire project for you. It also means working with the same set of people who understand your vision and how you want your home to look afterward.