Floating bed designs have an unusual and exciting aura that encloses them. Since most modern homes and interiors are around the principle of ‘clean and well-defined lines, they make an appealing choice. In order to the DIY Floating bed frame in your home, let’s go, step by step.

Aesthetically charming, space-conscious, and offering even the smaller rooms an open and spacious look, floating bed models tend to bring in an unparalleled sense of sophistication and style. While these beautiful hanging bed designs offer a more relaxed and holiday-like experience, floating beds imbibe a more futuristic look.

If the theme of your bedroom is minimalistic or even contemporary, floating beds fit in seamlessly. But they can work pretty well in more conventional and vibrant settings as well.

A floating bed highlights a remarkable design that makes you want to look under it. This is because such a bed appears floating. However, there’s no magic attached to floating beds. There is an analysis regarding how it’s all possible.

Due to technological advancement and the study of new materials, today almost any idea can be put into practice. Even a floating bed that demands a resistant composition is doable these days! They have various structural support mechanisms, as well as materials, depending on the chosen bed.

Besides the unique and transforming design of a floating bed, there’s also a practical side to it. More precisely, you have more area available for storing underneath it. So, you can use ornamental cases to organize your things under the bed. Moreover, depending on the manufacturing company, there are different accessories that come with the floating bed itself, such as bedside tables or tables directly attached to its structure.

Things To Keep In Mind

Regardless of your choice, keep in mind that quality is very important in the case of these bed types. You wouldn’t want your bed to just fall off without previous warning, right? So, don’t try to pick the cheapest model and install it yourself unless you know what you are doing.

Extra caution is advised in case such a bed is mounted in the children’s room. Except for these considerations, you are free to enjoy new bed models that increase your comfort. Since there are so many interior design novelties out there, you can never stop decorating or enhancing your home.

Step 1: Measure Out the Wood for DIY Floating Bed Frame

diy floating bed frame

Source: bobvila.com

Instruments needed: Laser measure, pencil, triangle, meter rule, set square, smooth-edged wooden planks, supporting slats

Procedure: First, measure the smooth-edged planks that will be used as the slat frame for your mattress. You’ll require 11 pieces measuring approx. 90 cm long. You can use a steel square and a digital laser measure to measure the planks. Use a pencil to check up the wood so you know where to cut it. You’ll require two supporting slats measuring 200 cm long.

It’s better to have the old wooden beams sawn for you at your local DIY furniture store for which you will require two beams measuring 2 m long including the wood thickness, and two measurings approx. 90 cm with the wood thickness.

Step 2: Grasp the Markings and Saw the Wooden Planks for the Floating Bed

diy floating bed frame

Source: woodmagazine.com

Instruments needed: NanoBlade saw, g-clamps, safety glasses, work gloves, earplugs

Procedure: DIY floating bed frame requires the sawing of the planks in the spots you marked earlier. To do this, adjust the planks to your work surface using screw clamps and make sure you wear your protective gear, including work gloves, ear defenders, and safety goggles. Cut the planks to the desired lengths using the saw.

Step 3: Sand Down the Wooden Parts of the DIY Floating Bed Frame

diy floating bed frame

Source: thesprucecrafts.com

Instruments needed: Multi-sander, Sanding sheet for multi-sander G120, g-clamps, safety glasses, work gloves, face mask

Procedure: Splinters of wood may appear along the sawn edges of the planks, be sure to sand down the wood thoroughly after sawing. You should also sand down the flat wooden surfaces for painting.

Step 4: Paint the Wooden Slats and Planks

diy floating bed frame

Source: hearstapps.com

Instruments needed: paint spray system, work gloves, face mask, safety glasses, earplugs, protective sheet, stick to stir up color, white 2-in-1 paint

Procedure: It’s now time to coat the sawn planks for your slat frame with a layer of paint as an added step in the DIY floating bed frame. Spread a protective covering or floor covering and put on your protective gear. Then stir the paint and pour it into its spray system. Spray the paint evenly onto the wooden slats and planks, then leave it to air dry. 

Step 5: Secure the Wooden Slats and Screw Together the Frame for the Floating Bed

diy floating bed frame

Source: bomb01.com

Instruments needed: Cordless Drill, g-clamps, safety glasses, 8 screws: 6 x 200 mm (D x L), 10 screws: 4 x 40 mm (D x L)

Procedure: Your DIY floating bed frame will slowly start to take form as you screw the painted wooden slats to the bottom of the wooden beams, as a supporting structure for the bed. To make the task of securing them with screw clamps and screwing the short screws into the wood easier, you can pre-drill the holes for the screws.

Once the two rails are secure, it’s time to build the frame for your DIY floating bed frame. Form an approximate right-angle with a pair of short and long wooden beams. If you place the frame against your bedroom wall, you will be able to screw them together easily without the frame moving. Pre-drill the holes, or it will be challenging to screw in the screws and you could split the wood.

Step 6: Secure the Eyebolts for Hanging Your Floating Bed and Assemble the Slat Frame

diy floating bed frame

Source: pinimg.com

Procedure: To enable you to secure your DIY floating bed frame to the bedroom ceiling, screw the eyebolts into the corners of the framework. First, drill a vertical hole from above into the wooden beams in each corner using a 12 mm wood drill bit. You can then twist the eyebolts through the eyelet into the wood using a screw clamp. Place the sawn smooth-edged planks into the frame to form the slat frame and leave a space of approx. 4 cm between each slat.

Step 7: Secure the Ceiling Hooks for the Floating Bed

diy floating bed frame

Source: pinimg.com

Procedure: Now it’s time to find the perfect spot for your DIY floating bed. You can project straight lines onto your bedroom ceiling using a cross-line laser and mark the positions of the hooks on the ceiling. Before you do this, we recommend marking the distance between the eyebolts on the floating bed – that way, you’ll know which measurements to mark out on your ceiling.

Then drill the holes for your ceiling hooks. The right drill for the job will depend on the type of material used in the wall. You will need to use either a cordless drill driver or a hammer drill.  Screw-in the ceiling hooks securely, once you’ve drilled the holes. 

You should inspect the ceiling for electric cables and metal objects using a detection device before you start drilling. We suggest getting someone to help you to hold the ladder steady or hand you your tools for drilling.

Step 8: Decide How High You Want Your DIY Floating Bed Frame to Be and Secure the Rope

floating bed frame

Source: pinimg.com

Procedure: First, measure the height of your ceiling. This is swift and easy if you use a laser measure. You can then work out the height of your DIY floating bed frame and the length of the ropes used to suspend it. Remember to leave enough rope to tie your knots – you’ll need around one meter extra per rope. Cut the ropes of the correct dimensions with your knife and secure them to your DIY floating bed using a tight knot.

Step 9: Knot the Hanging Bed Securely to the Ceiling

floating bed frame

Source: redd.it

Procedure: First, lift the bed together with your helper onto a bench or several chairs. This will give you more space for maneuver when knotting the rope tightly. Take the rope attached to one of the corners by standing on a ladder. Then thread the rope through the ceiling hooks, enabling you to slowly lift the floating bed into the air and your helper should lift the bed simultaneously. While you’re doing this, make sure that you stand firmly on the ladder.

Knot the ropes securely onto the ceiling hooks one by one, moving from one corner to another. Use a hangman’s knot this time and thread the rope through the ceiling hooks and lay it alongside the other, longer part of the rope, first from the front and then from behind. Pull everything tight by threading the end of the rope through the loop. Now you just have to remove the bench or chairs and you’ll be able to try out your new DIY floating bed frame.


The thought of floating in the air is something that has always intrigued people for a long. Interior designers have taken advantage of this allure by coming up with some innovative decor and furnishing design ideas that look like they are levitating with no support whatsoever. While hanging beds offer a more casual look, floating beds bring a sense of innovation and refined class. Their refined shape and unassuming simplicity and minimalism ensure that they always steal the show in your beautiful bedroom.

We hope that the article helped in guiding you through the DIY floating bed frame, which is basically the most amazing and easy thing to build.

I hope you like this blog and keep coming to Homedesignnow for more interesting tips and ideas on home improvement and decoration.